bms_w050_sw_bmb_mia
Do not driveTesla · BMS system
Battery Management System — Battery Monitoring Board (BMB) Not Responding
What it means
Each battery module has a monitoring board (BMB) that reports cell voltages and temperatures to the BMS. One or more of those boards has gone silent — "missing in action." Blind to part of the pack, the BMS shuts down high-voltage operation: the car may not restart, drive, or charge.
Symptoms
- Car may not restart
- "Service needed" warning
- Unable to charge
- Sometimes intermittent — works, then fails again
Likely causes (by probability)
- 1.A failed BMB inside the packMedium
- 2.Wiring/connector fault between the BMBs and the BMS (corrosion, loose connector, damage)Medium
- 3.Low 12V supply disrupting module communicationsLow
- 4.Water intrusion into the pack areaLow
What you can check yourself
- 01Check the 12V battery first — weak low-voltage power can silence module communications.
- 02Power off, wait, and restart once; note whether the same alert returns.
- 03Note any recent water exposure, flooding, or pack-area work.
- 04BMBs and their harnesses live inside the sealed pack — diagnosis and repair are Tesla Service only.
EV systems involved in bms_w050_sw_bmb_mia
Battery management system (BMS)
The pack's dedicated computer. It balances cells, estimates state of charge and health, controls the main contactors, watches isolation, and decides when the pack must limit power or refuse to operate. Nearly every "the battery says no" behavior traces back to the BMS.
Thermal management (cooling loop)
Pumps, valves, fans and coolant loops that keep the battery, motors, power electronics and cabin in their happy temperature bands. An EV derates power and charging speed long before anything overheats, so most thermal codes are about prevention, not damage.
High-voltage battery pack
The traction battery — hundreds of lithium-ion cells grouped into modules, plus the sense harness that reports every cell group's voltage and temperature. It is the single most expensive component in the car, and most battery-related alerts originate from measurements taken here.
Charging system
The charge port, onboard charger (AC), fast-charge controller (DC/CHAdeMO/GB-T), and all the communication protocols that negotiate current between the car and the charging station. Failures split cleanly into power problems and communication problems.
Severity
The car is blind to part of its battery and correctly refuses to operate. Rule out the 12V battery, then tow to service.
Estimated repair cost
Dealer / service center
— – —
Covered under battery warranty in many cases; out-of-warranty cost varies — get a quote from Tesla Service.
DIY
Not DIY-safe — professional repair recommended.
Estimated ranges based on owner reports. Actual pricing varies by model, year, region and warranty status.
What to read next
Related fault codes
Other alerts from the same failure family — useful for cross-checking symptoms.
- bms_a175_charge_failure_externalBattery Management System — Charging Error Caused by the Station
- bms_f067_sw_low_coolnt_flow_rateBattery Management System: Low Battery Coolant Flow
- bms_f161_sw_contactor_stressBattery Management System: Contactor Stress Estimate High
- bms_w023_sw_contactors_open_hwocBattery Management System — Contactors Opened by Over-Current Events (Counter)