bms_f021_sw_dr_limits_regulation
Do not driveTesla · BMS system
Battery Management System: Drive Limits Regulation
What it means
The BMS is actively limiting power because pack current, pack voltage, or an individual brick voltage moved outside the expected range. Think of it as the battery protecting itself in real time: it saw regen current, discharge current, or voltage go too high or too low and clamped output accordingly.
Symptoms
- Reduced acceleration or limited regen braking
- Power limit indicator (dashed line) on the energy display
- Driving or charging may eventually be disabled if the condition persists
- Often no customer message at all — log-only in many cases
Likely causes (by probability)
- 1.Very cold or very hot battery reducing allowable current (often normal behavior)High
- 2.Brick-level voltage imbalance triggering conservative limitsMedium
- 3.Current or voltage sensor drift causing false limit engagementLow
What you can check yourself
- 01Note the battery temperature when it happens — cold-weather power limits are expected and clear as the pack warms
- 02Use Scan My Tesla to watch brick voltages under load and look for one brick sagging more than the rest
- 03Check whether limits appear only under hard acceleration or regen, or constantly
- 04If limits persist at normal temperatures and moderate SOC, log the data and schedule service
EV systems involved in bms_f021_sw_dr_limits_regulation
Battery management system (BMS)
The pack's dedicated computer. It balances cells, estimates state of charge and health, controls the main contactors, watches isolation, and decides when the pack must limit power or refuse to operate. Nearly every "the battery says no" behavior traces back to the BMS.
Driver assistance sensors & compute
Cameras, radar (on equipped cars), ultrasonic sensors, and the computer that fuses them into Autopilot/FSD and safety features. These systems degrade gracefully: they remove convenience features rather than touching steering, brakes or throttle.
High-voltage battery pack
The traction battery — hundreds of lithium-ion cells grouped into modules, plus the sense harness that reports every cell group's voltage and temperature. It is the single most expensive component in the car, and most battery-related alerts originate from measurements taken here.
Thermal management (cooling loop)
Pumps, valves, fans and coolant loops that keep the battery, motors, power electronics and cabin in their happy temperature bands. An EV derates power and charging speed long before anything overheats, so most thermal codes are about prevention, not damage.
Severity
If the car still drives, treat it as reduced capability and drive gently. If driving or charging is disabled entirely, stop and schedule service.
Estimated repair cost
Dealer / service center
— – —
Often sensor- or temperature-related; pack-internal issues are covered under battery warranty in many cases — get a quote from Tesla Service.
DIY
Not DIY-safe — professional repair recommended.
Estimated ranges based on owner reports. Actual pricing varies by model, year, region and warranty status.
What to read next
Related fault codes
Other alerts from the same failure family — useful for cross-checking symptoms.
- bms_w023_sw_contactors_open_hwocBattery Management System — Contactors Opened by Over-Current Events (Counter)
- bms_w104_hw_bmb_enumerationBattery Management System — Battery Monitoring Board Failed Startup Enumeration
- bms_a007_sw_slowed_chg_batt_coldBattery Management System — Charging Slowed, Battery Cold
- bms_a109_hw_bmb_mute_status_mismatchBattery Management System — Cell Monitor Mute State Mismatch