bms_a091_sw_chargeport_mia
Do not driveTesla · BMS system
Battery Management System — Charge Port Communication Lost
What it means
The BMS has stopped receiving messages from the charge port controller, so it marks the port as missing. With no communication, the car cannot manage a charge session safely, and driving, charging, and low-voltage support may all be blocked while the alert is active.
Symptoms
- "Unable to charge — Service required" message
- Charge port unresponsive (no light, door may not open normally)
- Car may refuse to drive while the alert is active
- Single chime with a warning icon
Likely causes (by probability)
- 1.Charge port controller crashed or lost powerMedium
- 2.Wiring/connector fault between the charge port and BMSMedium
- 3.Water intrusion or damage at the charge portMedium
- 4.Failed charge port electronicsLow
What you can check yourself
- 01Do a full sleep cycle and retry — a hung port controller often recovers.
- 02Visually inspect the charge port area for moisture, debris, or damage (no tools inside the connector).
- 03Check for a companion charge-port fault alert, which narrows it to port hardware.
- 04Note any recent car washes, heavy rain, or port door issues for the technician.
EV systems involved in bms_a091_sw_chargeport_mia
Battery management system (BMS)
The pack's dedicated computer. It balances cells, estimates state of charge and health, controls the main contactors, watches isolation, and decides when the pack must limit power or refuse to operate. Nearly every "the battery says no" behavior traces back to the BMS.
Charging system
The charge port, onboard charger (AC), fast-charge controller (DC/CHAdeMO/GB-T), and all the communication protocols that negotiate current between the car and the charging station. Failures split cleanly into power problems and communication problems.
Low-voltage (12V/16V) system
The small battery and DC-DC converter that power every computer, relay, contactor coil and sensor in the car. EVs are famously sensitive to a weak low-voltage battery — it causes cascading "ghost" faults across unrelated systems.
Drive unit (motor + inverter)
The inverter switches battery DC into the variable AC that spins the motor, and the resolver (position sensor) tells it exactly where the rotor is. Torque control is only as good as that position feedback and the inverter's thermal headroom.
Severity
Charging — and possibly driving — is blocked until the port comes back online. If a sleep cycle does not fix it, book service.
Estimated repair cost
Dealer / service center
— – —
Charge port repairs are often covered under the basic vehicle or battery warranty; out-of-warranty cost varies — get a quote from Tesla Service.
DIY
Not DIY-safe — professional repair recommended.
Estimated ranges based on owner reports. Actual pricing varies by model, year, region and warranty status.
What to read next
Related fault codes
Other alerts from the same failure family — useful for cross-checking symptoms.
- bms_f030_sw_chg_port_door_openBattery Management System: Charge Port Door Open with Welded Fast-Charge Contactor
- bms_f124_sw_bmb_comm_integrityBattery Management System: Battery Monitoring Board Communication Integrity Issue
- bms_u016_feim_delayed_ctr_closeBattery Management System — Extra Isolation Check Before Powering Up
- bms_w061_sw_bms_power_supplyBattery Management System — BMS Supply Voltage Out of Range