bms_f163_sw_contactor_wot_count
Safe to driveTesla · BMS system
Battery Management System: Contactor Wide-Open-Throttle Stress Event
What it means
The BMS logged that the contactors experienced the electrical stress of a wide-open-throttle (maximum power) event. Full-power launches push enormous current through the contactors, and the car counts these events as part of its contactor wear tracking. It is informational, not a failure.
Symptoms
- No customer-facing symptoms — log-only counter
- Vehicle operates completely normally
- Follows hard acceleration or track use
Likely causes (by probability)
- 1.Maximum-power launches / track driving (normal use, counted for wear tracking)High
What you can check yourself
- 01Nothing to check on the car — this is a usage counter, not a fault
- 02If you drive hard regularly, expect contactor wear alerts (bms_f161) earlier in the pack's life
- 03Ask service to read the stress counters if you are buying/selling the car
EV systems involved in bms_f163_sw_contactor_wot_count
Battery management system (BMS)
The pack's dedicated computer. It balances cells, estimates state of charge and health, controls the main contactors, watches isolation, and decides when the pack must limit power or refuse to operate. Nearly every "the battery says no" behavior traces back to the BMS.
High-voltage distribution & safety
Contactors (big relays that connect the pack to the car), the pyrofuse (a one-shot crash disconnect), precharge circuitry, and the isolation monitor that constantly checks high voltage is not leaking to the chassis. Faults here are treated as safety-critical.
High-voltage battery pack
The traction battery — hundreds of lithium-ion cells grouped into modules, plus the sense harness that reports every cell group's voltage and temperature. It is the single most expensive component in the car, and most battery-related alerts originate from measurements taken here.
Drive unit (motor + inverter)
The inverter switches battery DC into the variable AC that spins the motor, and the resolver (position sensor) tells it exactly where the rotor is. Torque control is only as good as that position feedback and the inverter's thermal headroom.
Severity
No action needed. It simply records spirited driving as part of contactor wear tracking.
Estimated repair cost
Dealer / service center
— – —
No repair applies — informational wear counter only.
DIY
Not DIY-safe — professional repair recommended.
Estimated ranges based on owner reports. Actual pricing varies by model, year, region and warranty status.
What to read next
Related fault codes
Other alerts from the same failure family — useful for cross-checking symptoms.
- bms_a143_sw_cac_changeBattery Management System — Large Capacity Estimate Update
- bms_f028_sw_drive_iso_stddevBattery Management System: High Isolation Reading Variance While Driving
- bms_f110_sw_module_vsenseBattery Management System: Module Voltage Sensing Mismatch
- bms_u011_fast_charger_problemBattery Management System — DC Fast Charging / Supercharging Blocked