bms_w024_sw_ctrs_open_under_load
Do not driveTesla · BMS system
Battery Management System — Battery Contactors Opened Under Load
What it means
The main battery contactors — the heavy relays connecting the pack to the car — opened while current was flowing. Opening under load is hard on contactors and immediately disconnects the pack, so the car can't drive, charge, or support the 12V system. It usually means the protection system reacted to something serious.
Symptoms
- Sudden loss of drive power
- Car won't restart or charge afterward
- May follow a clunk/click sound from the battery area
- Often accompanied by over-current or isolation alerts
Likely causes (by probability)
- 1.A protection event (over-current, isolation loss, crash signal) forcing the contactors openHigh
- 2.Loss of contactor coil power or a wiring fault in the contactor control circuitMedium
- 3.Worn or failing contactorsLow
What you can check yourself
- 01Don't keep cycling power trying to force a restart — note the alerts and conditions instead.
- 02Check for a recent impact, flood exposure, or underbody strike.
- 03Verify the 12V battery is healthy; low 12V can drop contactor power.
- 04Arrange a tow to Tesla Service — contactor and pack diagnosis is not DIY-safe.
EV systems involved in bms_w024_sw_ctrs_open_under_load
Battery management system (BMS)
The pack's dedicated computer. It balances cells, estimates state of charge and health, controls the main contactors, watches isolation, and decides when the pack must limit power or refuse to operate. Nearly every "the battery says no" behavior traces back to the BMS.
Low-voltage (12V/16V) system
The small battery and DC-DC converter that power every computer, relay, contactor coil and sensor in the car. EVs are famously sensitive to a weak low-voltage battery — it causes cascading "ghost" faults across unrelated systems.
High-voltage battery pack
The traction battery — hundreds of lithium-ion cells grouped into modules, plus the sense harness that reports every cell group's voltage and temperature. It is the single most expensive component in the car, and most battery-related alerts originate from measurements taken here.
High-voltage distribution & safety
Contactors (big relays that connect the pack to the car), the pyrofuse (a one-shot crash disconnect), precharge circuitry, and the isolation monitor that constantly checks high voltage is not leaking to the chassis. Faults here are treated as safety-critical.
Severity
The pack disconnected itself for a reason. Tow the car to service rather than experimenting with restarts.
Estimated repair cost
Dealer / service center
— – —
Covered under battery warranty in many cases; out-of-warranty cost varies — get a quote from Tesla Service.
DIY
Not DIY-safe — professional repair recommended.
Estimated ranges based on owner reports. Actual pricing varies by model, year, region and warranty status.
What to read next
Related fault codes
Other alerts from the same failure family — useful for cross-checking symptoms.
- bms_w027_sw_drive_iso_repeatedBattery Management System — Repeated Loss of High-Voltage Isolation While Driving
- bms_w124_sw_bmb_comm_integrityBattery Management System — Communication Errors With a Battery Monitoring Board
- bms_a029_dsoc_limitingBattery Management System — Charge Voltage Capped (Cell Imbalance Protection)
- bms_a129_sw_vsh_failureBattery Management System — Voltage Sense Harness Fault