cp_a051
Drive with cautionTesla · CP system
Charge Port — Overheating During Charge Session
What it means
The port temperature sensor detected the connector getting hotter than allowed during charging, so the car slowed or stopped the session to protect the hardware.
Symptoms
- Charging speed drops sharply mid-session
- Port area warm to the touch
- More common on high-amperage AC or worn public DC connectors
Likely causes (by probability)
- 1.Poor contact from worn/dirty pins (resistance = heat)High
- 2.Loose terminal inside the portMedium
- 3.Faulty public charger connectorMedium
- 4.Port cooling/ventilation blockageLow
What you can check yourself
- 01Inspect pins for discoloration or pitting — heat damage is visible.
- 02If it only happens at one public station, report the stall and move on.
- 03Reduce AC charging amps in settings as a temporary workaround.
- 04Heat-damaged ports should be replaced, not nursed along.
EV systems involved in cp_a051
Charging system
The charge port, onboard charger (AC), fast-charge controller (DC/CHAdeMO/GB-T), and all the communication protocols that negotiate current between the car and the charging station. Failures split cleanly into power problems and communication problems.
Driver assistance sensors & compute
Cameras, radar (on equipped cars), ultrasonic sensors, and the computer that fuses them into Autopilot/FSD and safety features. These systems degrade gracefully: they remove convenience features rather than touching steering, brakes or throttle.
Thermal management (cooling loop)
Pumps, valves, fans and coolant loops that keep the battery, motors, power electronics and cabin in their happy temperature bands. An EV derates power and charging speed long before anything overheats, so most thermal codes are about prevention, not damage.
Vehicle network (CAN / gateway)
Multiple CAN buses link every controller; the gateway routes messages between them and to diagnostics. "MIA" (missing in action) alerts almost always mean a node stopped sending on its bus — the cause can be the node itself, its wiring, or its power supply.
Deep dive: what owners should know
Heat at an electrical connection is physics doing its job badly: resistance where there should be none, turning amperage into temperature one watt at a time. CP_A051 is the charge port's own thermometer reporting that the connector is running hotter than the design allows, and the car's response is immediate and correct — it throttles the session or ends it entirely. Left alone, this escalates in a direction nobody wants: pitting and discoloration on the pins raise resistance further, which raises temperature further, and the connector's service life collapses from years to months. The root causes sort into two piles by location. The car-side pile holds worn or damaged port pins, a loose internal terminal, or debris forcing poor contact — all visible with a flashlight and a careful look for discoloration, darkening, or pitting on the pins. The station-side pile holds aging public connectors whose springs have fatigued; a connector that grips loosely makes poor contact no matter how healthy the car is. The tell that splits them is consistency: if overheating follows one particular public station, report the stall and move on; if it happens at home, at high amperage, on a connector that once ran cool, look inside the port. As a bridge measure, lowering the charge current limit in settings reduces the heat generation at the cost of slower charging — legitimate for a trip's duration, not a retirement plan. A heat-damaged port should be replaced rather than nursed; the damaged pins never recover, and every hot session spends the connector's remaining life.
Severity
The car protects itself, but repeated overheating degrades the connector. Address it.
Estimated repair cost
Dealer / service center
$300 – $1,200
Port replacement.
DIY
$150 – $500
Port assembly swap.
Estimated ranges based on owner reports. Actual pricing varies by model, year, region and warranty status.
What to read next
Related fault codes
Other alerts from the same failure family — useful for cross-checking symptoms.