hvbatt_a122_isolationdegradation
Drive with cautionTesla · HVBATT system
High-Voltage Battery — Isolation Degrading (Early Warning)
What it means
The BMS sees the high-voltage isolation reading slipping below its comfort threshold while the contactors are closed. It is still above the hard failure line, so the car keeps working — but the trend is pointing the wrong way.
Symptoms
- No customer-facing message in most cases
- Silent alert on the center display
- Car drives and charges normally for now
- May come and go with weather and humidity
Likely causes (by probability)
- 1.Early moisture ingress or contamination in a high-voltage componentHigh
- 2.Aging insulation somewhere in the high-voltage systemMedium
- 3.Environmental humidity causing temporary low readingsLow
What you can check yourself
- 01Track when it appears — wet weather correlation is valuable diagnostic info for service
- 02Check for other isolation alerts (a120, a123) that indicate progression
- 03Full sleep cycle and monitor whether the alert returns
- 04Do not attempt to inspect or dry high-voltage components yourself
EV systems involved in hvbatt_a122_isolationdegradation
High-voltage battery pack
The traction battery — hundreds of lithium-ion cells grouped into modules, plus the sense harness that reports every cell group's voltage and temperature. It is the single most expensive component in the car, and most battery-related alerts originate from measurements taken here.
High-voltage distribution & safety
Contactors (big relays that connect the pack to the car), the pyrofuse (a one-shot crash disconnect), precharge circuitry, and the isolation monitor that constantly checks high voltage is not leaking to the chassis. Faults here are treated as safety-critical.
Battery management system (BMS)
The pack's dedicated computer. It balances cells, estimates state of charge and health, controls the main contactors, watches isolation, and decides when the pack must limit power or refuse to operate. Nearly every "the battery says no" behavior traces back to the BMS.
Charging system
The charge port, onboard charger (AC), fast-charge controller (DC/CHAdeMO/GB-T), and all the communication protocols that negotiate current between the car and the charging station. Failures split cleanly into power problems and communication problems.
Severity
The car is fine to drive today, but isolation that is degrading tends to keep degrading. Get it on the service radar before it becomes a no-start fault.
Estimated repair cost
Dealer / service center
— – —
Covered under battery warranty in many cases; out-of-warranty cost varies — get a quote from Tesla Service.
DIY
Not DIY-safe — professional repair recommended.
Estimated ranges based on owner reports. Actual pricing varies by model, year, region and warranty status.
What to read next
Related fault codes
Other alerts from the same failure family — useful for cross-checking symptoms.
- hvbatt_a722_bp1dsoclimitingHigh-Voltage Battery — Charging Capped at ~50% Because of a Weak Cell Group
- hvbatt_a742_vshfailureHigh-Voltage Battery — Voltage Sense Harness Failure
- hvbatt_a237_bmsassertedcpfaultlineHigh-Voltage Battery — BMS Declared a Charge Port Fault (Welded Contactor)
- hvbatt_a281_acjbbedl3relaymaybeweldedHigh-Voltage Battery — Bed Outlet Line 3 Relay Suspected Welded (ACJB)