All codes

hvbatt_a281_acjbbedl3relaymaybewelded

Drive with caution

Tesla · HVBATT system

High-Voltage Battery — Bed Outlet Line 3 Relay Suspected Welded (ACJB)

What it means

The BMS suspects the bed outlet line 3 relay in the AC junction box may be welded shut. The protective behavior mirrors the confirmed version of this fault family: AC charging is blocked while DC fast charging remains available.

Symptoms

  • No customer-facing message in many cases
  • AC charging may refuse to start
  • DC fast charging still works
  • Bed outlets may be disabled (Cybertruck)

Likely causes (by probability)

  1. 1.Bed outlet line 3 relay sticking or beginning to weldMedium
  2. 2.Ambiguous relay sensing giving a "maybe" readingMedium
  3. 3.Overload or short history on the bed outlet circuitLow

What you can check yourself

  • 01Use DC fast charging to keep the battery charged in the meantime
  • 02Watch for escalation to a confirmed welded alert
  • 03Recall any heavy loads recently run from the bed outlets
  • 04Book service — the relay lives inside the high-voltage junction box and is not a DIY part

EV systems involved in hvbatt_a281_acjbbedl3relaymaybewelded

High-voltage battery pack

The traction battery — hundreds of lithium-ion cells grouped into modules, plus the sense harness that reports every cell group's voltage and temperature. It is the single most expensive component in the car, and most battery-related alerts originate from measurements taken here.

Charging system

The charge port, onboard charger (AC), fast-charge controller (DC/CHAdeMO/GB-T), and all the communication protocols that negotiate current between the car and the charging station. Failures split cleanly into power problems and communication problems.

Battery management system (BMS)

The pack's dedicated computer. It balances cells, estimates state of charge and health, controls the main contactors, watches isolation, and decides when the pack must limit power or refuse to operate. Nearly every "the battery says no" behavior traces back to the BMS.

Vehicle network (CAN / gateway)

Multiple CAN buses link every controller; the gateway routes messages between them and to diagnostics. "MIA" (missing in action) alerts almost always mean a node stopped sending on its bus — the cause can be the node itself, its wiring, or its power supply.

Severity

Drive with caution

DC fast charging still works, so you will not get stranded — but if home AC charging is your lifeline, schedule service promptly.

Estimated repair cost

Dealer / service center

— – —

Covered under battery warranty in many cases; out-of-warranty cost varies — get a quote from Tesla Service.

DIY

Not DIY-safe — professional repair recommended.

Estimated ranges based on owner reports. Actual pricing varies by model, year, region and warranty status.

Content pending community verification. This entry is based on public owner reports and general repair knowledge. Exact part numbers, prices and procedures vary by model year — confirm with your service documentation before acting. Not affiliated with any vehicle manufacturer.

What to read next

Related fault codes

Other alerts from the same failure family — useful for cross-checking symptoms.

Featured on NewTool.site