All codes

hvp_w012_bmbdataintegrityloss

Drive with caution

Tesla · HVP system

High-Voltage Controller — Battery Monitoring Data Integrity Lost

What it means

The battery monitoring boards (BMBs) report cell data to the BMS over a daisy-chain link. This alert means the chain has had a double break long enough that some sensor data was lost and substituted with estimated values. The car is flying partially blind on cell measurements.

Symptoms

  • No customer-facing message in most cases
  • Silent alert on the center display
  • Possible inaccurate range or state-of-charge readings
  • May coincide with other pack sensing alerts

Likely causes (by probability)

  1. 1.Damaged BMB daisy-chain wiring or connectors inside the packHigh
  2. 2.A failing battery monitoring boardMedium
  3. 3.Physical pack damage affecting the internal harnessLow

What you can check yourself

  • 01Note any recent impacts or pack-area work before reporting to service
  • 02Watch state-of-charge behavior for jumps or sudden drops — signs of substituted data
  • 03Check for related alerts (BMS_w169, HVBATT_a742) about voltage sensing
  • 04Internal pack wiring is service-only — no DIY inspection of the BMB chain

EV systems involved in hvp_w012_bmbdataintegrityloss

High-voltage distribution & safety

Contactors (big relays that connect the pack to the car), the pyrofuse (a one-shot crash disconnect), precharge circuitry, and the isolation monitor that constantly checks high voltage is not leaking to the chassis. Faults here are treated as safety-critical.

Driver assistance sensors & compute

Cameras, radar (on equipped cars), ultrasonic sensors, and the computer that fuses them into Autopilot/FSD and safety features. These systems degrade gracefully: they remove convenience features rather than touching steering, brakes or throttle.

High-voltage battery pack

The traction battery — hundreds of lithium-ion cells grouped into modules, plus the sense harness that reports every cell group's voltage and temperature. It is the single most expensive component in the car, and most battery-related alerts originate from measurements taken here.

Battery management system (BMS)

The pack's dedicated computer. It balances cells, estimates state of charge and health, controls the main contactors, watches isolation, and decides when the pack must limit power or refuse to operate. Nearly every "the battery says no" behavior traces back to the BMS.

Severity

Drive with caution

The car compensates with estimated data, but real sensor coverage is degraded. Schedule service — cell monitoring is not something you want running on guesses.

Estimated repair cost

Dealer / service center

— – —

Covered under battery warranty in many cases; out-of-warranty cost varies — get a quote from Tesla Service.

DIY

Not DIY-safe — professional repair recommended.

Estimated ranges based on owner reports. Actual pricing varies by model, year, region and warranty status.

Content pending community verification. This entry is based on public owner reports and general repair knowledge. Exact part numbers, prices and procedures vary by model year — confirm with your service documentation before acting. Not affiliated with any vehicle manufacturer.

What to read next

Related fault codes

Other alerts from the same failure family — useful for cross-checking symptoms.

Featured on NewTool.site