bms_a140_hw_bmb_status_fault
Safe to driveTesla · BMS system
Battery Management System — Cell Monitor Hardware Fault Flag
What it means
One of the battery monitoring boards in the pack's daisy-chain has raised its own internal fault flag. The board is still talking, but it is reporting that something on it is unhappy — which can make its cell measurements unreliable. Mainly an informational heads-up for service.
Symptoms
- No driver-visible symptoms
- Silent center-display alert
- Possible substituted or flagged cell data in service logs
- May precede more serious monitoring alerts
Likely causes (by probability)
- 1.Developing hardware fault on a monitoring boardMedium
- 2.Marginal solder joint or component aging on the boardMedium
- 3.Transient glitch that self-clearedLow
What you can check yourself
- 01Check whether it recurs — a single flag is a blip, a repeating flag is a failing board.
- 02Watch for companion BMB alerts (communication, reference voltage, status).
- 03Report it at your next service visit with the approximate date.
- 04No DIY path; monitoring boards are inside the sealed pack.
EV systems involved in bms_a140_hw_bmb_status_fault
Battery management system (BMS)
The pack's dedicated computer. It balances cells, estimates state of charge and health, controls the main contactors, watches isolation, and decides when the pack must limit power or refuse to operate. Nearly every "the battery says no" behavior traces back to the BMS.
Vehicle network (CAN / gateway)
Multiple CAN buses link every controller; the gateway routes messages between them and to diagnostics. "MIA" (missing in action) alerts almost always mean a node stopped sending on its bus — the cause can be the node itself, its wiring, or its power supply.
High-voltage battery pack
The traction battery — hundreds of lithium-ion cells grouped into modules, plus the sense harness that reports every cell group's voltage and temperature. It is the single most expensive component in the car, and most battery-related alerts originate from measurements taken here.
Drive unit (motor + inverter)
The inverter switches battery DC into the variable AC that spins the motor, and the resolver (position sensor) tells it exactly where the rotor is. Torque control is only as good as that position feedback and the inverter's thermal headroom.
Severity
Not urgent alone, but worth a service mention — a degrading monitoring board can eventually block charging.
Estimated repair cost
Dealer / service center
— – —
Covered under battery warranty in many cases; out-of-warranty cost varies — get a quote from Tesla Service.
DIY
Not DIY-safe — professional repair recommended.
Estimated ranges based on owner reports. Actual pricing varies by model, year, region and warranty status.
What to read next
Related fault codes
Other alerts from the same failure family — useful for cross-checking symptoms.
- bms_w002_hw_over_voltageBattery Management System — Hardware Over-Voltage (Battery Shut Down)
- bms_w089_sw_thc_miaBattery Management System — Thermal Controller (THC) Not Responding
- bms_a066Battery Management System — Charge Port / Charging Communication Fault
- bms_a095_sw_ui_miaBattery Management System — Touchscreen Not Responding